NEW EC F5 MOTOR BY ECOFIT | Rosenberg

Version française

info@rosenbergcanada.com

Catalog

« Back to news

NEW EC F5 MOTOR BY ECOFIT

October 30, 2019

NEW EC F5 MOTOR BY ECOFIT: AS COMPACT AS AN AC MOTOR / MORE EFFICIENT AND QUIETER

Our EC motors have many advantages:

Easy driving
High efficiency
Low energy consumption
Integrated monitoring functions
Easy installation and connection
Expanded functionalities: speed control, speed sensor or alarm, constant airflow, constant pressure. With their small size, EC motors F5 are interchangeable with ECOFIT AC motors. For example, the F5 motorize backwards motor, wheels of diameters 133, 180, 192 and 220, single inlet centrifugal forward fans of diameter 108 to 160, double inlet centrifugal forward fans of diameter 120 to 133 will accommodate the interchangeable function.

download PDF:https://rosenbergcanada.com/files/uploads/cece8d89e1e76891e4ecfc1c709c9670.pdf

#ecmotortechnology #ecmotors #ecm #energysaving #energyefficiency #technologiemoteurec #économiedénergie #moteursec #efficacitéénergétique #rosenbergcanada #rosenbergfanscanada #rosenbergfans #canadahvac #hvaccanada #rosenbergventilation #airmovement #ECOFITfans #HVACsolution #ECOFITVentilateurs #ECOFITMoteurs #industrialfans #VentilateursRosenberg #RosenbergVentilateurs #CanadaCVAC #CVACcanada #ventilationrosenberg #mouvementdelair #solutionCVAC #ventilateursindustriels

Rosenberg Canada will participate in the Buildings Show-2022 in Toronto

November 15, 2022

Rosenberg Canada will participate in the Buildings Show-2022 in Toronto. Visit us at booth #1018 in the South Building of the Metro Toronto Convention Center from November 30 to December 2, 2022.

Rosenberg Canada will participate in the Restaurant Show-2022 in Toronto. Visit us at booth #1308.

Rosenberg Canada will participate in the RC-2022 show in Toronto. We will be exhibiting our Air Curtain models ZEN and WB-Series.
Visit us at booth #1308.

Rosenberg Canada will be exhibiting at CMPX - 2022 in Toronto.

Rosenberg Canada will be exhibiting at CMPX - 2022 in Toronto, which will take place at the Toronto Metro Convention Centre from March 23-25, 2022

During the exhibition, Rosenberg Canada will be showcasing our OEM Fan line, Rosenberg's HVAC retrofit solution - ECFanGrid, and Rosenberg air curtains by Airtecnics.

« Back to news

About EC Technology

Rosenberg: Leading the way with energy-efficient EC Technology

Our energy-saving EC motors are developed and manufactured exclusively on our modern production line at our headquarters in Künzelsau. Through the combination of know-how and innovative manufacturing technology we attain a quality that meets the highest standards.

About EC (ECM) Technology

EC (Electronically Commuted, or Electronically Controlled) motors are electric motors which have permanent magnets on the rotor and use electronics to control the voltage and current applied to the motor.

EC motors have no brushes, so avoid the sparking and short life of brushed motors. Because they have electronics controlling the stator, and do not need to waste power inducing the rotor field, they give better performance and controllability, and run cooler than induction motors (for small motors, at least: high horsepower 3 phase induction motors can be very efficient). EC motors are used today in many fractional-horsepower applications where high motor efficiency, reliability, and/or controllability is desired.

Advantages:

EC motors are very high efficiency, and maintain a high efficiency level at part speed. This means that in most cases they use from less than one third to one half of the electricity used by the traditional "shaded pole" induction motors used in the ventilation and refrigeration industries, which in turn translates into lower operating costs and short payback periods.

EC motors’ high efficiency also means that the motors run “cool”, and dramatically reduce the amount of waste heat produced. Reduced waste heat at the evaporator motor level also typically results in reduced operation at the compressor level, which allows further energy savings. Further, running cooler improves the life of highly loaded motor parts like windings and bearings.

EC motors also have a wider operating range than traditional induction motors, which means that one ECM motor can replace a number of induction motor models. In this way, the number of models required by a typical customer is significantly decreased, which decreases and simplifies inventory. This is the main reason why ECM product lines usually include less motor models than their induction counterparts.

In terms of speed control and features, because the motor’s operation is controlled by software, EC motors allow customers to optimize and integrate the motor, fan and controller with the application, and to include features like data communications, constant volume control, variable speed, etc.

EC motors are also quieter than traditional inefficient motors, have longer design life and require less maintenance.

Watch video

Quality pays for itself. The slightly higher investment costs compared to conventional motors is usually amortized within a short operating time due to lower energy consumption und greater ease of installation. No transformer controller, motor overload switch, thermocouple meter, VFD, or phase angle controller are necessary.