Version française

info@rosenbergcanada.com

Catalog

« Back to news

Rosenberg Fans' Latest ECFanGrid Project: AHU Installation for Edmundston Community Amphitheatre

November 7, 2017

Showcasing the Latest ECFanGrid Installation: New AHU System for the Jean-Daigle Centre in Edmundston, NB

Discover the latest ECFanGrid project—a state-of-the-art AHU installation for the Jean-Daigle Centre, a multi-use community amphitheater in Edmundston, New Brunswick.

Project Overview:

Location: Jean-Daigle Centre, Edmundston, NB
Installation Type: New AHU System
Supply Fan Grid: 4x6 Fan Grid (24 Fans)
Return Fan Grid: 3x4 Fan Grid (12 Fans)
Project Partner: ZERO-C, a leading Design-Build HVAC/R company, was awarded the contract to design and install the ventilation and air conditioning system for this brand-new, multi-million-dollar arena.

Amphitheatre Details:

Investment: $21 million
Capacity: 2,400 seats for ice sports, 3,680 seats in show configuration
Completion Date: November 2017

For a deeper dive into this cutting-edge project, including technical specifications and design insights, please visit the Showcase Section of ECFanGrid.ca.

Download the detailed PDF with full project information here: [Link]

Hashtags: #ECFanGrid #AHUInstallation #RosenbergFans #HVACProjects #CommunityAmphitheatre #ZeroC #HVACDesign #EdmundstonNB

For more information please VISIT SHOWCASE SECTION OF ECFANGRID.CA

Rosenberg Canada Showcases ECFanGrid System Ahead of MCEE 2025

Discover the ECFanGrid by Rosenberg Canada – engineered for retrofit success, energy efficiency, and EC motor reliability.

Visit us at MCEE 2025 | Booth #822 | Montréal

More at: ecfangrid.ca

Rosenberg Canada Featured in HPAC Magazine – Celebrating 20 Years of HVAC Innovation

Rosenberg Canada is proud to be featured in the Spring 2025 issue of HPAC Magazine. Visit us at MCEE 2025 in Montreal – Booth #822 – and explore our latest fan technologies.

Rosenberg Canada at MCEE 2025 – Visit Booth #822 for HVAC Solutions

February 25, 2025

Visit Rosenberg Canada at MCEE 2025, Booth #822, to explore high-performance HVAC fans and ventilation solutions for energy efficiency and airflow optimization.

« Back to news

About EC Technology

Rosenberg: Leading the way with energy-efficient EC Technology

Our energy-saving EC motors are developed and manufactured exclusively on our modern production line at our headquarters in Künzelsau. Through the combination of know-how and innovative manufacturing technology we attain a quality that meets the highest standards.

About EC (ECM) Technology

EC (Electronically Commuted, or Electronically Controlled) motors are electric motors which have permanent magnets on the rotor and use electronics to control the voltage and current applied to the motor.

EC motors have no brushes, so avoid the sparking and short life of brushed motors. Because they have electronics controlling the stator, and do not need to waste power inducing the rotor field, they give better performance and controllability, and run cooler than induction motors (for small motors, at least: high horsepower 3 phase induction motors can be very efficient). EC motors are used today in many fractional-horsepower applications where high motor efficiency, reliability, and/or controllability is desired.

Advantages:

EC motors are very high efficiency, and maintain a high efficiency level at part speed. This means that in most cases they use from less than one third to one half of the electricity used by the traditional "shaded pole" induction motors used in the ventilation and refrigeration industries, which in turn translates into lower operating costs and short payback periods.

EC motors’ high efficiency also means that the motors run “cool”, and dramatically reduce the amount of waste heat produced. Reduced waste heat at the evaporator motor level also typically results in reduced operation at the compressor level, which allows further energy savings. Further, running cooler improves the life of highly loaded motor parts like windings and bearings.

EC motors also have a wider operating range than traditional induction motors, which means that one ECM motor can replace a number of induction motor models. In this way, the number of models required by a typical customer is significantly decreased, which decreases and simplifies inventory. This is the main reason why ECM product lines usually include less motor models than their induction counterparts.

In terms of speed control and features, because the motor’s operation is controlled by software, EC motors allow customers to optimize and integrate the motor, fan and controller with the application, and to include features like data communications, constant volume control, variable speed, etc.

EC motors are also quieter than traditional inefficient motors, have longer design life and require less maintenance.

Watch video

Quality pays for itself. The slightly higher investment costs compared to conventional motors is usually amortized within a short operating time due to lower energy consumption und greater ease of installation. No transformer controller, motor overload switch, thermocouple meter, VFD, or phase angle controller are necessary.