Rosenberg Fans Canada will exhibit at the Toronto Building Show-2021. | Rosenberg

Version française

info@rosenbergcanada.com

Catalog

« Back to news

Rosenberg Fans Canada will exhibit at the Toronto Building Show-2021.

November 16, 2021

Rosenberg Canada will be exhibiting at the Buildings Show - 2021 in Toronto, which will take place at the Toronto Metro Convention Centre from December 1 - 3, 2021.

During the exhibition, Rosenberg Canada will be showcasing our ECFanGrid and Rosenberg ZEN air curtain by Airtecnics.

ECFanGrid-is a cutting-edge and cost-effective modular fan solution. The system is driven by Rosenberg's own variable speed, energy-efficient EC Motors (ECM). The ECFanGrid is perfect for HVAC retrofit projects as well as new projects requiring efficient Air Handling Units (AHU).

ZEN is a decorative air curtain in contemporary architectural style. Its minimalist and smart design blends with any building’s aesthetics and offers infinite options for customization. Double-inlet centrifugal EC fans driven by external rotor motors have a low noise level and extremely low energy consumption. Airfoil-shaped anodized aluminum outlet vanes are adjustable in both directions. The ZEN model can be installed horizontally or vertically.

Visit us at booth#912 to find out more.

Looking forward to seeing you.

Rosenberg Canada will participate in the Restaurant Show-2022 in Toronto. Visit us at booth #1308.

Rosenberg Canada will participate in the RC-2022 show in Toronto. We will be exhibiting our Air Curtain models ZEN and WB-Series.
Visit us at booth #1308.

Rosenberg Canada will be exhibiting at CMPX - 2022 in Toronto.

Rosenberg Canada will be exhibiting at CMPX - 2022 in Toronto, which will take place at the Toronto Metro Convention Centre from March 23-25, 2022

During the exhibition, Rosenberg Canada will be showcasing our OEM Fan line, Rosenberg's HVAC retrofit solution - ECFanGrid, and Rosenberg air curtains by Airtecnics.

August 16, 2021

The new, retrofittable Dplus diffuser for axial fans is an ideal solution for converting dynamic pressure into static pressure. The gain in static pressure can reduce the fan's motor power requirement, which lowers the fan's operating costs. The gain in static pressure can also be used in such a way that the fan delivers more air volume with the same power requirement as a fan not using the Dplus diffusor.

« Back to news

About EC Technology

Rosenberg: Leading the way with energy-efficient EC Technology

Our energy-saving EC motors are developed and manufactured exclusively on our modern production line at our headquarters in Künzelsau. Through the combination of know-how and innovative manufacturing technology we attain a quality that meets the highest standards.

About EC (ECM) Technology

EC (Electronically Commuted, or Electronically Controlled) motors are electric motors which have permanent magnets on the rotor and use electronics to control the voltage and current applied to the motor.

EC motors have no brushes, so avoid the sparking and short life of brushed motors. Because they have electronics controlling the stator, and do not need to waste power inducing the rotor field, they give better performance and controllability, and run cooler than induction motors (for small motors, at least: high horsepower 3 phase induction motors can be very efficient). EC motors are used today in many fractional-horsepower applications where high motor efficiency, reliability, and/or controllability is desired.

Advantages:

EC motors are very high efficiency, and maintain a high efficiency level at part speed. This means that in most cases they use from less than one third to one half of the electricity used by the traditional "shaded pole" induction motors used in the ventilation and refrigeration industries, which in turn translates into lower operating costs and short payback periods.

EC motors’ high efficiency also means that the motors run “cool”, and dramatically reduce the amount of waste heat produced. Reduced waste heat at the evaporator motor level also typically results in reduced operation at the compressor level, which allows further energy savings. Further, running cooler improves the life of highly loaded motor parts like windings and bearings.

EC motors also have a wider operating range than traditional induction motors, which means that one ECM motor can replace a number of induction motor models. In this way, the number of models required by a typical customer is significantly decreased, which decreases and simplifies inventory. This is the main reason why ECM product lines usually include less motor models than their induction counterparts.

In terms of speed control and features, because the motor’s operation is controlled by software, EC motors allow customers to optimize and integrate the motor, fan and controller with the application, and to include features like data communications, constant volume control, variable speed, etc.

EC motors are also quieter than traditional inefficient motors, have longer design life and require less maintenance.

Watch video

Quality pays for itself. The slightly higher investment costs compared to conventional motors is usually amortized within a short operating time due to lower energy consumption und greater ease of installation. No transformer controller, motor overload switch, thermocouple meter, VFD, or phase angle controller are necessary.